Zmodem File Transfert - Revision history

AtariWikiSysop: 7 revisions imported

2018-06-03T23:14:35Z

7 revisions imported

Marcello at 14:17, 5 July 2012

2012-07-05T14:17:42Z

Marcello at 14:16, 5 July 2012

2012-07-05T14:16:17Z

Marcello: /* = Configuration */

2012-07-05T14:15:36Z

‎= Configuration

Marcello at 14:15, 5 July 2012

2012-07-05T14:15:12Z

Marcello at 14:14, 5 July 2012

2012-07-05T14:14:06Z

Marcello at 13:40, 5 July 2012

2012-07-05T13:40:31Z

Marcello: Created page with "= Zmodem File Transfert = Provided you have correctly configured your Using an Atari ST as Unix/Linux Terminal, you need the following to do Zmodem file transferts. On the..."

2012-07-05T13:38:38Z

Created page with "= Zmodem File Transfert = Provided you have correctly configured your Using an Atari ST as Unix/Linux Terminal, you need the following to do Zmodem file transferts. On the..."

New page

= Zmodem File Transfert =

Provided you have correctly configured your [[Using an Atari ST as Unix/Linux Terminal]], you need the following to do Zmodem file transferts.

On the Unix side:
install the lrzsz programm

On the ST side:
Make sure that the TAZ terminal knows about your zmodem programm (xyz.ttp for instance) by editing the appropriate entry in the "Paths" config menu.

← Older revision		Revision as of 14:17, 5 July 2012
Line 1:		Line 1:
−	Provided you have correctly configured your [[Using an Atari ST as Unix/Linux Terminal]], you ~~need~~ the ~~following to do Zmodem file transfers~~.	+	Provided you have correctly configured your [[Using an Atari ST as Unix/Linux Terminal]], you can transfer files over the serial port using the zmodem protocol.

	==== Configuration ====		==== Configuration ====

@@ Line 13: / Line 13: @@
 Once you're logged in your unix system from the ST Terminal emulator, typing
-{{{
-sz /home/manu/myfiles/*
+ sz /home/manu/myfiles/*
-}}}
 will send all the files of the sz /home/manu/myfiles/ directory.
@@ Line 22: / Line 22: @@
 ==== Sending a file from the ST ====
 Once you're logged in your unix system from the ST Terminal emulator, typing
-{{{
-rz
+ rz
-}}}
 will wait for an incoming file from the st, and write it inside the current working directory.

@@ Line 1: / Line 1: @@
 Provided you have correctly configured your [[Using an Atari ST as Unix/Linux Terminal]], you need the following to do Zmodem file transfers.
-===== Configuration ====
+==== Configuration ====
 On the Unix side:

@@ Line 1: / Line 1: @@
-Provided you have correctly configured your [[Using an Atari ST as Unix/Linux Terminal]], you need the following to do Zmodem file transferts.
+Provided you have correctly configured your [[Using an Atari ST as Unix/Linux Terminal]], you need the following to do Zmodem file transfers.
 ===== Configuration ====
@@ Line 10: / Line 10: @@
 Make sure that the TAZ terminal knows about your zmodem programm (xyz.ttp for instance) by editing the appropriate entry in the "Paths" config menu.
-===== Receiving a file on the ST ====
+==== Receiving a file on the ST ====
 Once you're logged in your unix system from the ST Terminal emulator, typing
@@ Line 20: / Line 20: @@
 Type now Alt-R inside TAZ, this will activate the Zmodem program on the ST, and it will start writing the files on your floppy or megadrive.
-Sending a file from the ST:
+==== Sending a file from the ST ====
 Once you're logged in your unix system from the ST Terminal emulator, typing
 {{{
@@ Line 27: / Line 27: @@
 will wait for an incoming file from the st, and write it inside the current working directory.
-Type now Alt-S inside TAZ, this will activate the Zmodem program on the ST, and after asking which files to send, the transfert will start.
+Type now Alt-S inside TAZ, this will activate the Zmodem program on the ST, and after asking which files to send, the transfer will start.
-Remember that if you want to use a transfert speed of 19200 bits/s you *need* tho use the HSMODEM utility on the ST, which is is an improved serial port driver. Without it, your files will prbably get corrupted during the transfert.
+Remember that if you want to use a transfer speed of 19200 bits/s you '''need''' to use the HSMODEM utility on the ST, which is is an improved serial port driver. Without it, your files will probably get corrupted during the transfer.

@@ Line 1: / Line 1: @@
 Provided you have correctly configured your [[Using an Atari ST as Unix/Linux Terminal]], you need the following to do Zmodem file transferts.
 On the Unix side:
@@ Line 9: / Line 10: @@
 Make sure that the TAZ terminal knows about your zmodem programm (xyz.ttp for instance) by editing the appropriate entry in the "Paths" config menu.
-Receiving a file on the ST:
+===== Receiving a file on the ST ====
 Sending a file from the ST:

← Older revision	Revision as of 23:14, 3 June 2018
(No difference)