Difference between revisions of "Zmodem File Transfert"
(Created page with "= Zmodem File Transfert = Provided you have correctly configured your Using an Atari ST as Unix/Linux Terminal, you need the following to do Zmodem file transferts. On the...") |
m (7 revisions imported) |
||
| (6 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | Provided you have correctly configured your [[Using an Atari ST as Unix/Linux Terminal]], you can transfer files over the serial port using the zmodem protocol. | |
| − | + | ==== Configuration ==== | |
| + | On the Unix side: | ||
| − | |||
install the lrzsz programm | install the lrzsz programm | ||
On the ST side: | On the ST side: | ||
| + | |||
Make sure that the TAZ terminal knows about your zmodem programm (xyz.ttp for instance) by editing the appropriate entry in the "Paths" config menu. | Make sure that the TAZ terminal knows about your zmodem programm (xyz.ttp for instance) by editing the appropriate entry in the "Paths" config menu. | ||
| + | |||
| + | ==== Receiving a file on the ST ==== | ||
| + | |||
| + | Once you're logged in your unix system from the ST Terminal emulator, typing | ||
| + | |||
| + | sz /home/manu/myfiles/* | ||
| + | |||
| + | will send all the files of the sz /home/manu/myfiles/ directory. | ||
| + | |||
| + | Type now Alt-R inside TAZ, this will activate the Zmodem program on the ST, and it will start writing the files on your floppy or megadrive. | ||
| + | |||
| + | ==== Sending a file from the ST ==== | ||
| + | Once you're logged in your unix system from the ST Terminal emulator, typing | ||
| + | |||
| + | rz | ||
| + | |||
| + | will wait for an incoming file from the st, and write it inside the current working directory. | ||
| + | |||
| + | Type now Alt-S inside TAZ, this will activate the Zmodem program on the ST, and after asking which files to send, the transfer will start. | ||
| + | |||
| + | Remember that if you want to use a transfer speed of 19200 bits/s you '''need''' to use the HSMODEM utility on the ST, which is is an improved serial port driver. Without it, your files will probably get corrupted during the transfer. | ||
Latest revision as of 01:14, 4 June 2018
Provided you have correctly configured your Using an Atari ST as Unix/Linux Terminal, you can transfer files over the serial port using the zmodem protocol.
Configuration
On the Unix side:
install the lrzsz programm
On the ST side:
Make sure that the TAZ terminal knows about your zmodem programm (xyz.ttp for instance) by editing the appropriate entry in the "Paths" config menu.
Receiving a file on the ST
Once you're logged in your unix system from the ST Terminal emulator, typing
sz /home/manu/myfiles/*
will send all the files of the sz /home/manu/myfiles/ directory.
Type now Alt-R inside TAZ, this will activate the Zmodem program on the ST, and it will start writing the files on your floppy or megadrive.
Sending a file from the ST
Once you're logged in your unix system from the ST Terminal emulator, typing
rz
will wait for an incoming file from the st, and write it inside the current working directory.
Type now Alt-S inside TAZ, this will activate the Zmodem program on the ST, and after asking which files to send, the transfer will start.
Remember that if you want to use a transfer speed of 19200 bits/s you need to use the HSMODEM utility on the ST, which is is an improved serial port driver. Without it, your files will probably get corrupted during the transfer.
