Atari F030 and CT60 Hardware Register Listing V1.0
Jump to navigation
Jump to search
CPU Reset Vectors
| Address | Description | Space |
|---|---|---|
| $000000 | Reset : Initial SSP | SP |
| $000004 | Reset : Initial PC | SP |
CPU Exception Vectors
| Address | Description | Space |
|---|---|---|
| $000008 | Bus Error | SD |
| $00000C | Address Error | SD |
| $000010 | Illegal Instruction | SD |
| $000014 | Zero Divide | SD |
| $000018 | CHK, CHK2 Instruction | SD |
| $00001C | cpTRAPcc, TRAPcc, TRAPV | SD |
| $000020 | Privilege Violation | SD |
| $000024 | Trace | SD |
| $000028 | Line 1010 Emulator (LineA) | SD |
| $00002C | Line 1111 Emulator (LineF) | SD |
| $000030 | (Unassigned, Reserved) | SD |
| $000034 | Coprocessor Protocol Violation (68030) | SD |
| $000038 | Format Error (68010) | SD |
| $00003C | Uninitialized Interrupt Vector | SD |
| $000040 | (Unassigned, Reserved) | SD |
| : | : : | : |
| $00005F | (Unassigned, Reserved) | SD |
| $000060 | Spurious Interrupt (Bus error during interrupt) | SD |
Auto-Vector Interrupts
| Address | Description | Space |
|---|---|---|
| $000064 | Level 1 Int Autovector (NOT USED) | SD |
| $000068 | Level 2 Int Autovector (HBL) | SD |
| $00006C | Level 3 Int Autovector (NOT USED) | SD |
| $000070 | Level 4 Int Autovector (VBL) | SD |
| $000074 | Level 5 Int Autovector (NOT USED) | SD |
| $000078 | Level 6 Int Autovector (NOT USED) | SD |
| $00007C | Level 7 Int Autovector (NOT USED) | SD |
Trap Instruction Vectors (Trap #n = Vector number + 32 + n)
| Address | Description | Space |
|---|---|---|
| $000080 | Trap0 | SD |
| $000084 | Trap1 (GemDOS) | SD |
| $000088 | Trap2 (AES/VDI) | SD |
| $00008C | Trap3 | SD |
| $000090 | Trap4 | SD |
| $000094 | Trap5 | SD |
| $000098 | Trap6 | SD |
| $00009C | Trap7 | SD |
| $0000A0 | Trap8 | SD |
| $0000A4 | Trap9 | SD |
| $0000A8 | Trap10 | SD |
| $0000AC | Trap11 | SD |
| $0000B0 | Trap12 | |
| $0000B4 | Trap13 (BIOS) | SD |
| $0000B8 | Trap14 (XBIOS) | SD |
FPU Vectors (68881/68882/Internal)
| Address | Description | Space |
|---|---|---|
| $0000C0 | FFCP Branch or Set on Unordered Condition | SD |
| $0000C4 | FFCP Inexact Result | SD |
| $0000C8 | FFCP Divide by Zero | SD |
| $0000CC | FFCP Underflow | SD |
| $0000D0 | FFCP Operand Error | SD |
| $0000D4 | FFCP Overflow | SD |
| $0000D8 | FFCP Signaling NAN | SD |
| $0000DC | (Unassigned, Reserved) | SD |
PMMU (68851/Internal(68030))
| Address | Description | Space |
|---|---|---|
| $0000E0 | MMU Configuration Error | SD |
| $0000E4 | MC68851, not used by MC68030 | SD |
| $0000E8 | MC68851, not used by MC68030 | SD |
Miscellaneous Vectors
| Address | Description | Space |
|---|---|---|
| $0000EC | (Unassigned, Reserved) | SD |
| : | : : | : |
| $0000FC | (Unassigned, Reserved) | SD |
User Assigned Interrupt Vectors
| Address | Description | Space |
|---|---|---|
| $000100 | ST-MFP-0 - IO0 - Centronics BUSY vector (#)64 | SD |
| $000104 | ST-MFP-1 - IO1 - Centronics ACK | SD |
| $000108 | ST-MFP-2 - IO2 - MIDI ACIA INT | SD |
| $00010C | ST-MFP-3 - IO3 - DSP Connector INT | SD |
| $000110 | ST-MFP-4 - Timer D (USART timer) | SD |
| $000114 | ST-MFP-5 - Timer C (200hz Clock) | SD |
| $000118 | ST-MFP-6 - IO4 - Keyboard & MIDI ACIA INT | SD |
| $00011C | ST-MFP-7 - IO5 - FDC & HDC & IDE INT | SD |
| $000120 | ST-MFP-8 - Timer B (HBL) | SD |
| $000124 | ST-MFP-9 - Send Error | SD |
| $000128 | ST-MFP-10 - Send buffer empty | SD |
| $00012C | ST-MFP-11 - Receive error | SD |
| $000130 | ST-MFP-12 - Receive buffer full | SD |
| $000134 | ST-MFP-13 - Timer A (STE sound) | SD |
| $000138 | ST-MFP-14 - IO6 - RS-232 RING Indicator | SD |
| $00013C | ST-MFP-15 - IO7 - SND INT | SD |
| $000180 | SCC Interrupt 96 | SD |
| : | : : | SD |
| $0001BC | SCC Interrupt 111 | SD |
| ------ | --------------------------------------------------- | ----- |
| $0001C0 | User Defined, Unused 112 | SD |
| $0003FC | User Defined, Unused 256 | SD |
System Crash Page
| Address | Size | Description | Space |
|---|---|---|---|
| $000380 | long | Validates System Crash Page if $12345678 | proc_lives |
| $000384 | ..... | Saved registers D0-D7 | proc_dregs |
| $0003A4 | ..... | Saved registers A0-A7 | proc_aregs |
| $0003C4 | long | Vector number of crash exception | proc_enum |
| $0003C8 | long | Saved USP | proc_usp |
| $0003CC | ..... | Saved 16 words from exception stack | proc_stk |
System Variables
| Address | Size | Description | Space |
|---|---|---|---|
| $000400 | long | GEM Event timer vector | etv_timer |
| $000404 | long | GEM Critical error handler | etv_critic |
| $000408 | long | GEM Program termination vector | etv_term |
| $00040C | long | GEM Additional vector #1 (Unused) | etv_xtra |
| : | : | : : : : : | : |
| $00041C | long | GEM Additional vector #5 (Unused) | etv_xtra |
| $000420 | long | Validates memory configuration if $752019F3 | memvalid |
| $000424 | word | Copy of contents of $FF8001 | memctrl |
| $000426 | long | Validates resvector if $31415926 | resvalid |
| $00042A | long | Reset vector | resvector |
| $00042E | long | Physical top of RAM | phystop |
| $000432 | long | Start of TPA (user memory) | _membot |
| $000436 | long | End of TPA (user memory) | _memtop |
| $00043A | long | Validates memcntrl and memconf if $237698AA | memval2 |
| $00043E | word | If nonzero, floppy disk VBL routine is disabled | flock |
| $000440 | word | Floppy Seek rate - 0:6ms, 1:12ms, 2:2ms, 3:3ms | seekrate |
| $000442 | word | Time between two timer calls (in milliseconds) | _timer_ms |
| $000444 | word | If not zero, verify floppy disk writes | _fverify |
| $000446 | word | Default boot device | _bootdev |
| $000448 | word | 0 - NTSC (60hz), <>0 - PAL (50hz) | palmode |
| $00044A | word | Default video resolution | defshiftmod |
| $00044C | word | Copy of contents of $FF8260 | sshiftmod |
| $00044E | long | Pointer to video RAM (logical screen base) | _v_bas_ad |
| $000452 | word | If not zero, VBL routine is not executed | vblsem |
| $000454 | word | Number of vertical blank routines | nvbls |
| $000456 | long | Pointer to list of vertical blank routines | _vblqueue |
| $00045A | long | If not zero, points to color palette to be loaded | colorptr |
| $00045E | long | If not zero, points to video ram for next VBL | screenpt |
| $000462 | long | Counter for number of VBLs | _vbclock |
| $000466 | long | Number of VBL routines executed | _frclock |
| $00046A | long | Vector for hard disk initialization | hdv_init |
| $00046E | long | Vector for resolution change | swv_vec |
| $000472 | long | Vector for getbpb for hard disk | hdv_bpb |
| $000476 | long | Vector for read/write routine for hard disk | hdv_rw |
| $00047A | long | Vector for hard disk boot | hdv_boot |
| $00047E | long | Vector for hard disk media change | hdv_mediach |
| $000482 | word | If not zero, attempt to load "COMMAND.PRG" on boot | _comload |
| $000484 | byte | Attribute vector for console output BIT 3 2 1 0 | conterm |
| $000486 | long | Return address for TRAP #14 (unused) | trp14ret |
| $00048A | long | Return address for critical error handler (unused) | criticret |
| $00048E | long | Memory descriptor block | themd |
| $00049E | long | Space for additional memory descriptors | themdmd |
| $0004A2 | long | Pointer to BIOS save registers block | savptr |
| $0004A6 | word | Number of connected floppy drives | _nflops |
| $0004A8 | long | Vector for screen output | con_state |
| $0004AC | word | Temporary storage for cursor line position | save_row |
| $0004AE | long | Pointer to save area for exception processing | sav_context |
| $0004B2 | long | Pointer to buffer control block for GEMDOS data | _bufl |
| $0004B6 | long | Pointer to buffer control block for GEMDOS fat/dir | _bufl |
| $0004BA | long | Counter for 200hz system clock | _hz_200 |
| $0004BC | long | Pointer to default environment string | the_env |
| $0004C2 | long | Bit allocation for physical drives (bit 0=A, 1=B..) | _drvbits |
| $0004C6 | long | Pointer to 1024-byte disk buffer | _dskbufp |
| $0004CA | long | Pointer to autoexecute path | _autopath |
| $0004CE | long | Pointer to VBL routine #1 | _vbl_lis |
| : | : | : : : : : | : |
| $0004EA | long | Pointer to VBL routine #8 | _vbl_lis |
| $0004EE | word | Flag for screen -> printer dump | _dumpflg |
| $0004F0 | word | Printer abort flag | _prtabt |
| $0004F2 | long | Pointer to start of OS | _sysbase |
| $0004F6 | long | Global shell pointer | _shell_p |
| $0004FA | long | Pointer to end of OS | end_os |
| $0004FE | long | Pointer to entry point of OS | exec_os |
| $000502 | long | Pointer to screen dump routine | scr_dump |
| $000506 | long | Pointer to _lstostat() | prv_lsto |
| $00050A | long | Pointer to _lstout() | prv_lst |
| $00050E | long | Pointer to _auxostat() | prv_auxo |
| $000512 | long | Pointer to _auxout() | prv_aux |
| $000516 | long | If AHDI, pointer to pun_info | pun_ptr |
| $00051A | long | If $5555AAAA, reset | memval3 |
| $00051E | long | 8 Pointers to input-status routines | xconstat |
| $00053E | long | 8 Pointers to input routines | xconin |
| $00055E | long | 8 Pointers to output-status routines | xcostat |
| $00057E | long | 8 Pointers to output routines | xconout |
| $00059E | word | If not 0, then not 68000 - use long stack frames | _longframe |
| $0005A0 | long | Pointer to cookie jar | _p_cookies |
| $0005A4 | long | Pointer to end of FastRam | ramtop |
| $0005A8 | long | Validates ramtop if $1357BD13 | ramvalid |
| $0005AC | long | Pointer to routine for system bell | bell_hook |
| $0005B0 | long | Pointer to routine for system keyclick | kcl_hook |
This portion of the document and onward yet to be converted to wiki tables. Arduous task! But worth it, I think
Address Size Description Bits used Read/Write
------------------------------------------------------------------------------
===F030 OS ROMs ===
-------+-----+-----------------------------------------------------+----------
$E00000|byte | |R
: | |TOS 512K ROMs |
$E7FFFF|byte | |
$E80000|byte | |R
: | : |Image of TOS 512K ROMs |
$EFFFFF|byte | |
-------+-----+-----------------------------------------------------+----------
===IDE Controller ===
-------+-----+-----------------------------------------------------+----------
$F00000|long |Data Register |R/W
$F00005|byte |Error Register BIT 7 6 5 4 3 2 1 0|R
| |Bad block mark -----------------------' | | | | | | ||
| |Uncorrectable error --------------------' | | | | | ||
| |Media change -----------------------------' | | | | ||
| |ID-Field not found -------------------------' | | | ||
| |Media change requested -----------------------' | | ||
| |Command aborted --------------------------------' | ||
| |Track 0 not found --------------------------------' ||
| |DAM not found --------------------------------------'|
$F00009|byte |Sector Count Register |W
$F0000D|byte |Sector Number Register |W
$F00011|byte |Cylinder Low Register |W
$F00015|byte |Cylinder High Register |W
$F00019|byte |Drive Head Register |W
$F0001D|byte |Status Register |R
$F0001D|byte |Command Register |W
$F00039|byte |Alternate Status Register |R
$F00039|byte |Data Output Register |W
-------+-----+-----------------------------------------------------+----------
===Falcon030 BUS Expansion Space ===
-------+-----+-----------------------------------------------------+----------
$F10000|word | |R/W
. | |576K A24/D16 Space | .
$F9FFFF|word | |R/W
-------+-----+-----------------------------------------------------+----------
===ROM ===
-------+-----+-----------------------------------------------------+----------
$FA0000| | |
: | |128K ROM expansion cartridge port |R
$FBFFFF| | |
-------+-----+-----------------------------------------------------+----------
===Falcon030 Memory Controller ===
------------------------------------------------------------------------------
$FF8006|byte | BIT 5 4|R/Write in
| |00 - 1Mb | Combel
| |01 - 4Mb | during
| |10 - 14Mb | Read.
| |11 - no boot ! |
------------------------------------------------------------------------------
===Falcon030 Processor Control ===
-------+-----+-----------------------------------------------------+----------
$FF8007|byte |Falcon Bus Control BIT 6 5 . . 2 . 0|R/W
| |F30 Start (0=Cold, 1=Warm) -------------' | | ||
| |STe Bus Emulation (0=on) ---------------' | ||
| |Blitter (0=8mhz, 1=16mhz) ---------------------' ||
| |68030 (0=8mhz, 1=16mhz) -------------------------'|
-------+-----+-----------------------------------------------------+----------
===SHIFTER Video Controller ===
-------+-----+-----------------------------------------------------+----------
$FF8201|byte |Video screen memory position (High byte) |R/W
$FF8203|byte |Video screen memory position (Mid byte) |R/W
$FF820D|byte |Video screen memory position (Low byte) |R/W
$FF8205|byte |Video address pointer (High byte) |R
$FF8207|byte |Video address pointer (Mid byte) |R
$FF8209|byte |Video address pointer (Low byte) |R
$FF820E|word |Offset to next line |R/W
$FF820F|byte |Width of a scanline (width in words-1) |R/W
$FF8210|word |Width of a scanline (width in words) |R/W
$FF8265|byte |Horizontal scroll register (0-15) |R/W
-------+-----+-----------------------------------------------------+----------
$FF820A|byte |Video synchronization mode BIT 1 0|R/W
| |0 - 60hz, 1 - 50hz -------------------------------+ ||
| |0 - internal, 1 - external sync --------------------'|
-------+-----+-----------------------------------------------------+----------
$FF8260|byte |Shifter resolution BIT 1 0|R/W
| |00 320x200x4 bitplanes (16 colors) ---------------+-+|
| |01 640x200x2 bitplanes (4 colors) ----------------+-+|
| |10 640x400x1 bitplane (1 colors) ----------------+-'|
$FF8262|word |TT Shifter resolution BIT 15 . . 12|R/W
| |Sample/Hold mode ----------------------------' ||
| |Hypermono mode -------------------------------------'|
| |Video Mode BIT 10 9 8|
| |000 320x200x4 bitplanes (16 colors) -----------+-+-+|
| |001 640x200x2 bitplanes (4 colors) ------------+-+-+|
| |010 640x400x1 bitplane (2 colors)(Duochrome) -+-+-+|
| |100 640x480x4 bitplanes (16 colors) -----------+-+-+|
| |110 1280x960x1 bitplane (2 colors) ------------+-+-+|
| |111 320x480x8 bitplanes (256 colors) ----------+-+-'|
| |ST Palette Bank BIT 3 2 1 0|
-------+-----+-----------------------------------------------------+----------
===Falcon030 VIDEL Video Controller ===
-------+-----+-----------------------------------------------------+----------
$FF8006|byte |Monitor Type BIT 7 6|R
| |00 - Monochrome (SM124) --------------------------+-+|
| |01 - Color (SC1224) ------------------------------+-+|
| |10 - VGA Color -----------------------------------+-+|
| |11 - Television ----------------------------------+-'|
$FF820E|word |Offset to next line |R/W
$FF8210|word |VWRAP - Linewidth in words |R/W
$FF8266|word |SPSHIFT BIT 10 . 8 . 6 5 4 3 2 1 0|R/W
| |2-colour mode ------------------' | | | | | | | ||
| |Truecolour mode --------------------' | | | | | | ||
| |Use external hsync ---------------------' | | | | | ||
| |Use external vsync -----------------------' | | | | ||
| |8 Bitplane mode ----------------------------' | | | ||
| |? Bitplane mode ------------------------------' | | ||
| |? Bitplane mode --------------------------------' | ||
| |? Bitplane mode ----------------------------------' ||
| |? Bitplane mode ------------------------------------'|
| +-----------------------------------------------------+
| | Horizontal Control Registers (9bit)|
$FF8280|word |HHC - Horizontal Hold Counter |R
$FF8282|word |HHT - Horizontal Hold Timer |R/W
$FF8284|word |HBB - Horizontal Border Begin |R/W
$FF8286|word |HBE - Horizontal Border End |R/W
$FF8288|word |HDB - Horizontal Display Begin |R/W
$FF828A|word |HDE - Horizontal Display End |R/W
$FF828C|word |HSS - Horizontal SS |R/W
$FF828E|word |HFS - Horizontal FS |R/W
$FF8290|word |HEE - Horizontal EE |R/W
| +-----------------------------------------------------+
| | Vertical Control Registers (10bit)|
$FF82A0|word |VFC - Vertcial Frequency Counter |R
$FF82A2|word |VFT - Vertical Frequency Timer |R/W
$FF82A4|word |VBB - Vertical Border Begin (count in 1/2 lines)|R/W
$FF82A6|word |VBE - Vertical Border End (count in 1/2 lines)|R/W
$FF82A8|word |VDB - Vertical Display Begin |R/W
$FF82AA|word |VDE - Vertical Display End |R/W
$FF82AC|word |VSS - Vertical SS |R/W
| +-----------------------------------------------------+
$FF82C0|word |??? - Video Clock (?) (Super78 puts $182 here) |R/W
$FF82C2|word |VCO - Video Control BIT 3 2 1 0|R/W
| |Quarter pixel width (quadruple pixels) -------' | | ||
| |Half pixel width (double pixels) ---------------' | ||
| |Skip line (interlace) ----------------------------' ||
| |Line doubling --------------------------------------'|
-------+-----+-----------------------------------------------------+----------
===DMA/WD1772 Disk controller ===
-------+-----+-----------------------------------------------------+----------
$FF8600| |Reserved |
$FF8602| |Reserved |
$FF8604|word |FDC access/sector count |R/W
$FF8606|word |DMA mode/status BIT 2 1 0|R
| |Condition of FDC DATA REQUEST signal -----------' | ||
| |0 - sector count null,1 - not null ---------------' ||
| |0 - no error, 1 - DMA error ------------------------'|
$FF8606|word |DMA mode/status BIT 8 7 6 . 4 3 2 1 .|W
| |0 - read FDC/HDC,1 - write ---------' | | | | | | | |
| |0 - HDC access,1 - FDC access --------' | | | | | | |
| |0 - DMA on,1 - no DMA ------------------' | | | | | |
| |Reserved ---------------------------------' | | | | |
| |0 - FDC reg,1 - sector count reg -----------' | | | |
| |0 - FDC access,1 - HDC access ----------------' | | |
| |0 - pin A1 low, 1 - pin A1 high ----------------' | |
| |0 - pin A0 low, 1 - pin A0 high ------------------' |
$FF8609|byte |DMA base and counter (High byte) |R/W
$FF860B|byte |DMA base and counter (Mid byte) |R/W
$FF860D|byte |DMA base and counter (Low byte) |R/W
$FF86OE|byte |High Density Drive BIT 1 0 |R/W
| | FDDS (0=DD, 1=HD) ---------------------------' | |
| | FCCLK (0=8MHz, 1=16MHz) ------------------------' |
-------+-----+-----------------------------------------------------+----------
===YM2149 Sound Chip ===
-------+-----+-----------------------------------------------------+----------
$FF8800|byte |Read data/Register select |R/W
| |0 Channel A Freq Low BIT 7 6 5 4 3 2 1 0|
| |1 Channel A Freq High BIT 3 2 1 0|
| |2 Channel B Freq Low BIT 7 6 5 4 3 2 1 0|
| |3 Channel B Freq High BIT 3 2 1 0|
| |4 Channel C Freq Low BIT 7 6 5 4 3 2 1 0|
| |5 Channel C Freq High BIT 3 2 1 0|
| |6 Noise Freq BIT 5 4 3 2 1 0|
| |7 Mixer Control BIT 7 6 5 4 3 2 1 0|
| | Port B IN/OUT (1=Output) -----------' | | | | | | ||
| | Port A IN/OUT ------------------------' | | | | | ||
| | Channel C Noise (1=Off) ----------------' | | | | ||
| | Channel B Noise --------------------------' | | | ||
| | Channel A Noise ----------------------------' | | ||
| | Channel C Tone (0=On) ------------------------' | ||
| | Channel B Tone ---------------------------------' ||
| | Channel A Tone -----------------------------------'|
| |8 Channel A Amplitude Control BIT 4 3 2 1 0|
| | Fixed/Variable Level (0=Fixed) -----------' | | | ||
| | Amplitude level control --------------------+-+-+-'|
| |9 Channel B Amplitude Control BIT 4 3 2 1 0|
| | Fixed/Variable Level ---------------------' | | | ||
| | Amplitude level control --------------------+-+-+-'|
| |10 Channel C Amplitude Control BIT 4 3 2 1 0|
| | Fixed/Variable Level ---------------------' | | | ||
| | Amplitude level control --------------------+-+-+-'|
| |11 Envelope Period High BIT 7 6 5 4 3 2 1 0|
| |12 Envelope Period Low BIT 7 6 5 4 3 2 1 0|
| |13 Envelope Shape BIT 3 2 1 0|
| | Continue -----------------------------------' | | ||
| | Attack ---------------------------------------' | ||
| | Alternate --------------------------------------' ||
| | Hold ---------------------------------------------'|
| | 00xx - \____________________________________ |
| | 01xx - /|___________________________________ |
| | 1000 - \|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\ |
| | 1001 - \____________________________________ |
| | 1010 - \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ |
| | 1011 - \|----------------------------------- |
| | 1100 - /|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/ |
| | 1101 - /------------------------------------ |
| | 1110 - /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ |
| | 1111 - /|___________________________________ |
| |14 Port A BIT 7 6 5 4 3 2 1 0|
| | IDE Drive On/OFF -------------------+ | | | | | | ||
| | Internal Speaker On/Off --------------' | | | | | ||
| | Centronics STROBE ----------------------' | | | | ||
| | DSP RESET --------------------------------' | | | ||
| | Centronics SELECT IN -----------------------' | | ||
| | Drive SELECT B -------------------------------' | ||
| | Drive SELECT A ---------------------------------' ||
| | Drive SIDE SELECT --------------------------------'|
| |15 Port B (Parallel port) |
$FF8802|byte |Write data |W
| +-----------------------------------------------------+
| |Note: PSG Registers are now fixed at these addresses.|
| |All other addresses are masked out on the Falcon. Any|
| |writes to the shadow registers $8804-$88FF will cause|
| |bus errors. Game/Demo coders beware! |
-------+-----+-----------------------------------------------------+----------
===DMA Sound System ===
-------+-----+-----------------------------------------------------+----------
$FF8900|byte |Buffer interrupts BIT 3 2 1 0|R/W
| |TimerA-Int at end of record buffer -----------' | | ||
| |TimerA-Int at end of replay buffer -------------' | ||
| |MFP-15-Int (I7) at end of record buffer ----------' ||
| |MFP-15-Int (I7) at end of replay buffer ------------'|
-------+-----+-----------------------------------------------------+----------
$FF8901|byte |DMA Control Register BIT 7 . 5 4 . . 1 0|R/W
| |1 - select record register -----------+ | | | ||
| |0 - select replay register -----------' | | | ||
| |Loop record buffer -----------------------' | | ||
| |DMA Record on ------------------------------' | ||
| |Loop replay buffer -------------------------------' ||
| |DMA Replay on --------------------------------------'|
-------+-----+-----------------------------------------------------+----------
$FF8903|byte |Frame start address (high byte) |R/W
$FF8905|byte |Frame start address (mid byte) |R/W
$FF8907|byte |Frame start address (low byte) |R/W
$FF8909|byte |Frame address counter (high byte) |R
$FF890B|byte |Frame address counter (mid byte) |R
$FF890D|byte |Frame address counter (low byte) |R
$FF890F|byte |Frame end address (high byte) |R/W
$FF8911|byte |Frame end address (mid byte) |R/W
$FF8913|byte |Frame end address (low byte) |R/W
-------+-----+-----------------------------------------------------+----------
$FF8920|byte |DMA Track Control BIT 5 4 . . 1 0|R/W
| |00 - Set DAC to Track 0 ------------------+-+ | ||
| |01 - Set DAC to Track 1 ------------------+-+ | ||
| |10 - Set DAC to Track 2 ------------------+-+ | ||
| |11 - Set DAC to Track 3 ------------------+-' | ||
| |00 - Play 1 Track --------------------------------+-+|
| |01 - Play 2 Tracks -------------------------------+-+|
| |10 - Play 3 Tracks -------------------------------+-+|
| |11 - Play 4 Tracks -------------------------------+-'|
-------+-----+-----------------------------------------------------+----------
$FF8921|byte |Sound mode control BIT 7 6 . . . . 1 0|R/W
| |0 - Stereo, 1 - Mono -----------------' | | ||
| |0 - 8bit -------------------------------+ | ||
| |1 - 16bit ------------------------------' | ||
| |Frequency control bits | ||
| |00 - Off -----------------------------------------+-+|
| |01 - 12517hz frequency ---------------------------+-+|
| |10 - 25033hz frequency ---------------------------+-+|
| |11 - 50066hz frequency ---------------------------+-'|
| |Samples are always signed. In stereo mode, data is |
| |arranged in pairs with high pair the left channel,low|
| |pair right channel. Sample length MUST be even in |
| |either mono or stereo mode. |
| |Example: 8 bit Stereo : LRLRLRLRLRLRLRLR |
| | 16 bit Stereo : LLRRLLRRLLRRLLRR |
| |2 track 16 bit stereo : LLRRllrrLLRRllrr |
-------+-----+-----------------------------------------------------+----------
===Falcon030 DMA/DSP Controllers ===
-------+-----+-----------------------------------------------------+----------
$FF8930|word |Crossbar Source Controller |R/W
| +-----------------------------------------------------+
| |Source: A/D Convertor BIT 15 14 13 12|
| |1 - Connect, 0 - disconnect ---------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock (Don't use) -----------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Source: External Input BIT 11 10 9 8|
| |0 - DSP IN, 1 - All others ----------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock -----------------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Source: DSP-XMIT BIT 7 6 5 4|
| |0 - Tristate and disconnect DSP -----------+ | | ||
| | (Only for external SSI use) | | | ||
| |1 - Connect DSP to multiplexer ------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock -----------------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Source: DMA-PLAYBACK BIT 3 2 1 0|
| |0 - Handshaking on, dest DSP-REC ----------+ | | ||
| |1 - Destination is not DSP-REC ------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock -----------------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
-------+-----+-----------------------------------------------------+----------
$FF8932|word |Crossbar Destination Controller |R/W
| +-----------------------------------------------------+
| |Destination: D/A Convertor BIT 15 14 13 12|
| |1 - Connect, 0 - Disconnect ---------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Destination: External Output BIT 11 10 9 8|
| |0 - DSP out, 1 - All others ---------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Destination: DSP-RECORD BIT 7 6 5 4|
| |0 - Tristate and disconnect DSP -----------+ | | ||
| | (Only for external SSI use) | | | ||
| |1 - Connect DSP to multiplexer ------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Destination: DMA-RECORD BIT 3 2 1 0|
| |0 - Handshaking on, src DSP-XMIT ----------+ | | ||
| |1 - Source is not DSP-XMIT ----------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
-------+-----+-----------------------------------------------------+----------
$FF8934|byte |Frequency Divider External Clock BIT 3 2 1 0|R/W
| |0000 - STe-Compatible mode |
| |0001 - 1111 Divide by 256 and then number |
-------+-----+-----------------------------------------------------+----------
$FF8935|byte |Frequency Divider Internal Sync BIT 3 2 1 0|R/W
| |0000 - STe-Compatible mode 1000 - 10927Hz* |
| |0001 - 49170Hz 1001 - 9834Hz |
| |0010 - 32780Hz 1010 - 8940Hz* |
| |0011 - 24585Hz 1011 - 8195Hz |
| |0100 - 19668Hz 1100 - 7565Hz* |
| |0101 - 16390Hz 1101 - 7024Hz* |
| |0110 - 14049Hz* 1110 - 6556Hz* |
| |0111 - 12292Hz 1111 - 6146Hz* |
| | * - Invalid for CODEC |
-------+-----+-----------------------------------------------------+----------
$FF8936|byte |Record Tracks Select BIT 1 0|R/W
| |00 - Record 1 Track ------------------------------+-+|
| |01 - Record 2 Tracks -----------------------------+-+|
| |10 - Record 3 Tracks -----------------------------+-+|
| |11 - Record 4 Tracks -----------------------------+-'|
-------+-----+-----------------------------------------------------+----------
$FF8937|byte |CODEC Input Source from 16bit adder BIT 1 0|R/W
| |Source: Multiplexer ------------------------------' ||
| |Source: A/D Convertor ------------------------------'|
-------+-----+-----------------------------------------------------+----------
$FF8938|byte |CODEC ADC-Input for L+R Channel BIT 1 0|R/W
| |0 - Microphone, 1 - Soundchip L R|
-------+-----+-----------------------------------------------------+----------
$FF8939|byte |Channel amplification BIT LLLL RRRR|R/W
| | Amplification is in +1.5dB steps |
-------+-----+-----------------------------------------------------+----------
$FF893A|word |Channel attenuation BIT LLLL RRRR|R/W
| | Attenuation is in -1.5dB steps |
-------+-----+-----------------------------------------------------+----------
$FF893C|byte |CODEC-Status BIT 1 0|R/W
| |Left Channel Overflow ----------------------------' ||
| |Right Channel Overflow -----------------------------'|
-------+-----+-----------------------------------------------------+----------
$FF8941|byte |GPx Data Direction BIT 2 1 0|R/W
| |0 - In, 1 - Out --------------------------------+-+-'|
| | For the GP0-GP2 pins on the DSP connector |
-------+-----+-----------------------------------------------------+----------
$FF8943|byte |GPx Data Port BIT 2 1 0|R/W
-------+-----+-----------------------------------------------------+----------
===F030 RTC Chip (DS1287) ===
-------+-----+-----------------------------------------------------+----------
$FF8961|byte |Register select |W
| |0 - Current Second |
| |1 - Second for alarm |
| |2 - Current Minute |
| |3 - Minute for alarm |
| |4 - Current Hour |
| |5 - Hour for alarm |
| |6 - Day of week (1=Sunday, 2=Monday, 3=...) |
| |7 - Day of Month |
| |8 - Month |
| |9 - Year (example : '93' for this year) |
| |A BIT 7|
| | If set, update time in progress ----------------'|
| | don't read time & date registers |
| |B BIT 7 6 5 4 3 2 1 0|
| |1 = Write Protect time & date --------' | | | | ||
| |1 = Enable alarm interrupt ---------------' | | | ||
| |1 = Interrupt after time updated -----------' | | ||
| |1 = Format Binary, 0 = Format BCD --------------' | ||
| |1 = 24hr format, 0 = 12hr format -----------------' ||
| |1 = Summer hours, 0 = Winter hours -----------------'|
| |C BIT 6 5 4|
| | ??? -------------------------------------------' | ||
| |1 = alarm is ringing -----------------------------' ||
| |1 = date is updated --------------------------------'|
| |On interrupt, read this register to determine source.|
| |D BIT 7|
| |1 = Battery dead -----------------------------------'|
$FF8963|byte |Register data |R/W
-------+-----+-----------------------------------------------------+----------
===Blitter ===
-------+-----+-----------------------------------------------------+----------
$FF8A00|word |Halftone-RAM, Word 0 |R/W
: | : | : : : : | :
$FF8A1E|word |Halftone-RAM, Word 15 |R/W
$FF8A20|word |Source X Increment (signed,even)|R/W
$FF8A22|word |Source Y Increment (signed,even)|R/W
$FF8A24|long |Source Address Register (24 bit,even)|R/W
$FF8A28|word |Endmask 1 (First write of a line)|R/W
$FF8A2A|word |Endmask 2 (All other line writes)|R/W
$FF8A2C|word |Endmask 3 (Last write of a line)|R/W
$FF8A2E|word |Destination X Increment (signed,even)|R/W
$FF8A30|word |Destination Y Increment (signed,even)|R/W
$FF8A32|long |Destination Address Register (24 bit,even)|R/W
$FF8A36|word |Words per Line in Bit-Block (0=65536)|R/W
$FF8A38|word |Lines per Bit-Block (0=65536)|R/W
$FF8A3A|byte |Halftone Operation Register BIT 1 0|R/W
| |00 - All ones ------------------------------------+-+|
| |01 - Halftone ------------------------------------+-+|
| |10 - Source --------------------------------------+-+|
| |11 - Source AND Halftone -------------------------+-'|
$FF8A3B|byte |Logical Operation Register BIT 3 2 1 0|R/W
| |0000 All zeros -------------------------------+-+-+-+|
| |0001 Source AND destination ------------------+-+-+-+|
| |0010 Source AND NOT destination --------------+-+-+-+|
| |0011 Source ----------------------------------+-+-+-+|
| |0100 NOT source AND destination --------------+-+-+-+|
| |0101 Destination -----------------------------+-+-+-+|
| |0110 Source XOR destination ------------------+-+-+-+|
| |0111 Source OR destination -------------------+-+-+-+|
| |1000 NOT source AND NOT destination ----------+-+-+-+|
| |1001 NOT source XOR destination --------------+-+-+-+|
| |1010 NOT destination -------------------------+-+-+-+|
| |1011 Source OR NOT destination ---------------+-+-+-+|
| |1100 NOT source ------------------------------+-+-+-+|
| |1101 NOT source OR destination ---------------+-+-+-+|
| |1110 NOT source OR NOT destination -----------+-+-+-+|
| |1111 All ones --------------------------------+-+-+-'|
$FF8A3C|byte |Line Number Register BIT 7 6 5 . 3 2 1 0|R/W
| |BUSY ---------------------------------' | | | | | ||
| |0 - Share bus, 1 - Hog bus -------------' | | | | ||
| |SMUDGE mode ------------------------------' | | | ||
| |Halftone line number -------------------------+-+-+-'|
$FF8A3D|byte |SKEW Register BIT 7 6 . . 3 2 1 0|R/W
| |Force eXtra Source Read --------------' | | | | ||
| |No Final Source Read -------------------' | | | ||
| |Source skew ----------------------------------+-+-+-'|
-------+-----+-----------------------------------------------------+----------
===Zilog 8530 SCC ===
-------+-----+-----------------------------------------------------+----------
$FF8C81|byte |Channel A - Control Register |R/W
$FF8C83|byte |Channel A - Data Register |R/W
$FF8C85|byte |Channel B - Control Register |R/W
$FF8C87|byte |Channel B - Data Register |R/W
-------+-----+-----------------------------------------------------+----------
===F030 Extended Joystick/Lightpen Ports ===
-------+-----+-----------------------------------------------------+----------
$FF9200|word |Fire buttons 1-4 Bit 3 2 1 0|R
| |Pause/F0 -------------------------------------' | | ||
| |F1 ---------------------------------------------' | ||
| |F2 -----------------------------------------------' ||
| |Option/F3 ------------------------------------------'|
$FF9202|word |Read Mask (0 - pin read) |W
$FF9202|word |Joystick Inputs BIT 7 6 5 4 3 2 1 0|R
| |Controller 1 pin 4 -------------------' | | | | | | ||
| |Controller 1 pin 3 ---------------------' | | | | | ||
| |Controller 1 pin 2 -----------------------' | | | | ||
| |Controller 1 pin 1 -------------------------' | | | ||
| |Controller 0 pin 4 ---------------------------' | | ||
| |Controller 0 pin 3/Paddle 1 Trigger ------------' | ||
| |Controller 0 pin 2/Paddle 0 Trigger --------------' ||
| |Controller 0 pin 1 ---------------------------------'|
| | BIT 15 14 13 12 11 10 9 8|
| |Controller 1 pin 14 ------------' | | | | | | ||
| |Controller 1 pin 13 ----------------' | | | | | ||
| |Controller 1 pin 12 -------------------' | | | | ||
| |Controller 1 pin 11 ----------------------' | | | ||
| |Controller 0 pin 14 -------------------------' | | ||
| |Controller 0 pin 13 ----------------------------' | ||
| |Controller 0 pin 12 ------------------------------' ||
| |Controller 0 pin 11 --------------------------------'|
$FF9210|word |X Paddle 0 Position BIT 7 6 5 4 3 2 1 0|R
$FF9212|word |Y Paddle 0 Position BIT 7 6 5 4 3 2 1 0|R
$FF9214|word |X Paddle 1 Position BIT 7 6 5 4 3 2 1 0|R
$FF9216|word |Y Paddle 1 Position BIT 7 6 5 4 3 2 1 0|R
$FF9220|word |Lightpen X-Position BIT 9 8 7 6 5 4 3 2 1 0|R
$FF9222|word |Lightpen Y-Position BIT 9 8 7 6 5 4 3 2 1 0|R
-------+-----+-----------------------------------------------------+----------
===Falcon VIDEL Palette Registers ===
-------+-----+-----------------------------------------------------+----------
| | BIT 33222222 22221111 11111198 76543210|
| | 10987654 32109876 543210 |
| | RRRRRr.. GGGGGg.. ........ BBBBBb..|
$FF9800|long |Palette Register 0 Lowercase = LSB|R/W
: | : | : : : | :
$FF9BFC|long |Palette Register 255 |R/W
-------+-----+-----------------------------------------------------+----------
===Falcon DSP Host Interface ===
-------+-----+-----------------------------------------------------+----------
$FFA200|byte |Interrupt Ctrl Register BIT 7 6 5 4 3 . 1 0|R/W
X:$FFE9| |INIT bit -----------------------------' | | | | | ||
| |00 - Interupt mode (DMA off) -----------+-+ | | | ||
| |01 - 24-bit DMA mode -------------------+-+ | | | ||
| |10 - 16-bit DMA mode -------------------+-+ | | | ||
| |11 - 8-bit DMA mode --------------------+-' | | | ||
| |Host Flag 1 --------------------------------' | | ||
| |Host Flag 0 ----------------------------------' | ||
| | Host mode Data transfers: | ||
| | Interrupt mode | ||
| |00 - No interrupts (Polling) ---------------------+-+|
| |01 - RXDF Request (Interrupt) --------------------+-+|
| |10 - TXDE Request (Interrupt) --------------------+-+|
| |11 - RXDF and TXDE Request (Interrupts) ----------+-+|
| | DMA Mode | ||
| |00 - No DMA --------------------------------------+-+|
| |01 - DSP to Host Request (RX) --------------------+-+|
| |10 - Host to DSP Request (TX) --------------------+-+|
| |11 - Undefined (Illegal) -------------------------+-'|
$FFA201|byte |Command Vector Register BIT 7 . . 4 3 2 1 0|R/W
X:$FFE9| |Host Command Bit (Handshake)----------' | | | | ||
| |Host Vector (0-31) -------------------------+-+-+-+-'|
$FFA202|byte |Interrupt Status Reg BIT 7 6 . 4 3 2 1 0|R
X:$FFE8| |ISR Host Request ---------------------' | | | | | ||
| |ISR DMA Status -------------------------' | | | | ||
| |Host Flag 3 --------------------------------' | | | ||
| |Host Flag 2 ----------------------------------' | | ||
| |ISR Transmitter Ready (TRDY) -------------------' | ||
| |ISR Transmit Data Register Empty (TXDE) ----------' ||
| |ISR Receive Data Register Full (RXDF) --------------'|
$FFA203|byte |Interrupt Vector Register |R/W
$FFA204|byte |Unused |
$FFA205|byte |DSP-Word High |R/W
X:$FFEB| | |
$FFA206|byte |DSP-Word Mid |R/W
X:$FFEB| | |
$FFA207|byte |DSP-Word Low |R/W
X:$FFEB| | |
-------+-----+-----------------------------------------------------+----------
===MFP 68901 - Multi Function Peripheral Chip ===
| | |
| | MFP Master Clock is 2,457,600 cycles/second |
-------+-----+-----------------------------------------------------+----------
$FFFA01|byte |Parallel Port Data Register |R/W
-------+-----+-----------------------------------------------------+----------
$FFFA03|byte |Active Edge Register BIT 7 6 5 4 3 2 1 0|R/W
| | | | | | | | | ||
| |IO7 - SND INT ------------------------' | | | | | | ||
| |IO6 - RS-232 RING Indicator ------------' | | | | | ||
| |IO5 - FDC & HDC & IDE INT ----------------' | | | | ||
| |IO4 - Keyboard & MIDI INT ------------------' | | | ||
| |IO3 - DSP INT --------------------------------' | | ||
| |IO2 - MIDI INT ---------------------------------' | ||
| |IO1 - Centronics ACK -----------------------------' ||
| |IO0 - Centronics BUSY ------------------------------'|
| +-----------------------------------------------------+
| | When port bits are used for input only: |
| |0 - Interrupt on pin high-low conversion |
| |1 - Interrupt on pin low-high conversion |
-------+-----+-----------------------------------------------------+----------
$FFFA05|byte |Data Direction BIT 7 6 5 4 3 2 1 0|R/W
| |0 - In, 1 - Out ----------------------+-+-+-+-+-+-+-'|
-------+-----+-----------------------------------------------------+----------
$FFFA07|byte |Interrupt Enable A BIT 7 6 5 4 3 2 1 0|R/W
$FFFA0B|byte |Interrupt Pending A BIT 7 6 5 4 3 2 1 0|R/W
$FFFA0F|byte |Interrupt In-service A BIT 7 6 5 4 3 2 1 0|R/W
$FFFA13|byte |Interrupt Mask A BIT 7 6 5 4 3 2 1 0|R/W
| |MFP Address | | | | | | | ||
| |$13C SND INT -----------------------' | | | | | | ||
| |$138 RS-232 Ring Detector ------------' | | | | | ||
| |$134 (STE sound) Timer A --------------' | | | | ||
| |$130 Receive buffer full ----------------' | | | ||
| |$12C Receive error ------------------' | | ||
| |$128 Send buffer empty --------------------' | ||
| |$124 Send error ----------------------' ||
| |$120 (HBL) Timer B ------------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
-------+-----+-----------------------------------------------------+----------
$FFFA09|byte |Interrupt Enable B BIT 7 6 5 4 3 2 1 0|R/W
$FFFA0D|byte |Interrupt Pending B BIT 7 6 5 4 3 2 1 0|R/W
$FFFA11|byte |Interrupt In-service B BIT 7 6 5 4 3 2 1 0|R/W
$FFFA15|byte |Interrupt Mask B BIT 7 6 5 4 3 2 1 0|R/W
| |MFP Address | | | | | | | ||
| |$11C FDC/HDC/IDE INT ----------' | | | | | | ||
| |$118 Keyboard/MIDI INT ------------' | | | | | ||
| |$114 (200hz clock) Timer C --------------' | | | | ||
| |$110 (USART timer) Timer D ----------------' | | | ||
| |$10C DSP Connector INT ------------------' | | ||
| |$108 MIDI INT --------------------' | ||
| |$104 Centronics ACK ----------------------' ||
| |$100 Centronics BUSY ------------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
-------+-----+-----------------------------------------------------+----------
$FFFA17|byte |Vector Register BIT 7 6 5 4 3 . . .|R/W
| |Vector Base Offset -------------------+-+-+-' | |
| |1 - *Software End-interrupt mode -------------+ |
| |0 - Automatic End-interrupt mode -------------' |
| |* - Default operating mode |
-------+-----+-----------------------------------------------------+----------
$FFFA19|byte |Timer A Control BIT 4 3 2 1 0|R/W
$FFFA1B|byte |Timer B Control BIT 4 3 2 1 0|R/W
| |Reset (force output low) -------------------' | | | ||
| +----------------------------------------------+-+-+-++
| |0000 - Timer stop, no function executed |
| |0001 - Delay mode, divide by 4 |
| |0010 - : : 10 |
| |0011 - : : 16 |
| |0100 - : : 50 |
| |0101 - : : 64 |
| |0110 - : : 100 |
| |0111 - Delay mode, divide by 200 |
| |1000 - Event count mode |
| |1xxx - Pulse extension mode, divide as above |
| +-----------------------------------------------------+
$FFFA1F|byte |Timer A Data |R/W
$FFFA21|byte |Timer B Data |R/W
-------+-----+-----------------------------------------------------+----------
$FFFA1D|byte |Timer C & D Control BIT 6 5 4 . 2 1 0|R/W
| | Timer Timer|
| | C D |
| +-----------------------------------------------------+
| |000 - Timer stop |
| |001 - Delay mode, divide by 4 |
| |010 - : : 10 |
| |011 - : : 16 |
| |100 - : : 50 |
| |101 - : : 64 |
| |110 - : : 100 |
| |111 - Delay mode, divide by 200 |
| +-----------------------------------------------------+
$FFFA23|byte |Timer C Data |R/W
$FFFA25|byte |Timer D Data |R/W
-------+-----+-----------------------------------------------------+----------
$FFFA27|byte |Sync Character |R/W
$FFFA29|byte |USART Control BIT 7 6 5 4 3 2 1 .|R/W
| |Clock divide (1 - div by 16) ---------' | | | | | | ||
| |Word Length 00 - 8 bits ----------------+-+ | | | | ||
| | 01 - 7 bits ----------------+-+ | | | | ||
| | 10 - 6 bits ----------------+-+ | | | | ||
| | 11 - 5 bits ----------------+-' | | | | ||
| |Bits Stop Start Format | | | | ||
| |00 0 0 Synchronous ----------------+-+ | | ||
| |01 1 1 Asynchronous ---------------+-+ | | ||
| |10 1 1.5 Asynchronous ---------------+-+ | | ||
| |11 1 2 Asynchronous ---------------+-' | | ||
| |Parity (0 - ignore parity bit) -----------------' | ||
| |Parity (0 - odd parity,1 - even) -----------------' ||
| |Unused ---------------------------------------------'|
$FFFA2B|byte |Receiver Status BIT 7 6 5 4 3 2 1 0|R/W
| |Buffer full --------------------------' | | | | | | ||
| |Overrun error --------------------------' | | | | | ||
| |Parity error -----------------------------' | | | | ||
| |Frame error --------------------------------' | | | ||
| |Found - Search/Break detected ----------------' | | ||
| |Match/Character in progress --------------------' | ||
| |Synchronous strip enable -------------------------' ||
| |Receiver enable bit --------------------------------'|
$FFFA2D|byte |Transmitter Status BIT 7 6 5 4 3 2 1 0|R/W
| |Buffer empty -------------------------' | | | | | | ||
| |Underrun error -------------------------' | | | | | ||
| |Auto turnaround --------------------------' | | | | ||
| |End of transmission ------------------------' | | | ||
| |Break ----------------------------------------' | | ||
| |High bit ---------------------------------------' | ||
| |Low bit ------------------------------------------' ||
| |Transmitter enable ---------------------------------'|
$FFFA2F|byte |USART data |R/W/
-------+-----+-----------------------------------------------------+----------
===6850 ACIA I/O Chips ===
-------+-----+-----------------------------------------------------+----------
$FFFC00|byte |Keyboard ACIA control BIT 7 6 5 4 3 2 1 0|W
| |Rx Int enable (1 - enable) -----------' | | | | | | ||
| |Tx Interrupts | | | | | | ||
| |00 - RTS low, Tx int disable -----------+-+ | | | | ||
| |01 - RTS low, Tx int enable ------------+-+ | | | | ||
| |10 - RTS high, Tx int disable ----------+-+ | | | | ||
| |11 - RTS low, Tx int disable, | | | | | | ||
| | Tx a break onto data out ----------+-' | | | | ||
| |Settings | | | | ||
| |000 - 7 bit, even, 2 stop bit --------------+-+-+ | ||
| |001 - 7 bit, odd, 2 stop bit ---------------+-+-+ | ||
| |010 - 7 bit, even, 1 stop bit --------------+-+-+ | ||
| |011 - 7 bit, odd, 1 stop bit ---------------+-+-+ | ||
| |100 - 8 bit, 2 stop bit --------------------+-+-+ | ||
| |101 - 8 bit, 1 stop bit --------------------+-+-+ | ||
| |110 - 8 bit, even, 1 stop bit --------------+-+-+ | ||
| |111 - 8 bit, odd, 1 stop bit ---------------+-+-' | ||
| |Clock divide | ||
| |00 - Normal --------------------------------------+-+|
| |01 - Div by 16 -----------------------------------+-+|
| |10 - Div by 64 -----------------------------------+-+|
| |11 - Master reset --------------------------------+-'|
$FFFC00|byte |Keyboard ACIA control BIT 7 6 5 4 3 2 1 0|R
| |Interrupt request --------------------' | | | | | | ||
| |Parity error ---------------------------' | | | | | ||
| |Rx overrun -------------------------------' | | | | ||
| |Framing error ------------------------------' | | | ||
| |CTS ------------------------------------------' | | ||
| |DCD --------------------------------------------' | ||
| |Tx data register empty ---------------------------' ||
| |Rx data register full ------------------------------'|
$FFFC02|byte |Keyboard ACIA data |R/W
$FFFC04|byte |MIDI ACIA control BIT 7 6 5 4 3 2 1 0|W
| |Rx Int enable (1 - enable) -----------' | | | | | | ||
| |Tx Interrupts | | | | | | ||
| |00 - RTS low, Tx int disable -----------+-+ | | | | ||
| |01 - RTS low, Tx int enable ------------+-+ | | | | ||
| |10 - RTS high, Tx int disable ----------+-+ | | | | ||
| |11 - RTS low, Tx int disable, | | | | | | ||
| | Tx a break onto data out ----------+-' | | | | ||
| |Settings | | | | ||
| |000 - 7 bit, even, 2 stop bit --------------+-+-+ | ||
| |001 - 7 bit, odd, 2 stop bit ---------------+-+-+ | ||
| |010 - 7 bit, even, 1 stop bit --------------+-+-+ | ||
| |011 - 7 bit, odd, 1 stop bit ---------------+-+-+ | ||
| |100 - 8 bit, 2 stop bit --------------------+-+-+ | ||
| |101 - 8 bit, 1 stop bit --------------------+-+-+ | ||
| |110 - 8 bit, even, 1 stop bit --------------+-+-+ | ||
| |111 - 8 bit, odd, 1 stop bit ---------------+-+-' | ||
| |Clock divide | ||
| |00 - Normal --------------------------------------+-+|
| |01 - Div by 16 -----------------------------------+-+|
| |10 - Div by 64 -----------------------------------+-+|
| |11 - Master reset --------------------------------+-'|
$FFFC04|byte |MIDI ACIA control BIT 7 6 5 4 3 2 1 0|R
| |Interrupt request --------------------' | | | | | | ||
| |Parity error ---------------------------' | | | | | ||
| |Rx overrun -------------------------------' | | | | ||
| |Framing error ------------------------------' | | | ||
| |CTS ------------------------------------------' | | ||
| |DCD --------------------------------------------' | ||
| |Tx data register empty ---------------------------' ||
| |Rx data register full ------------------------------'|
$FFFC06|byte |MIDI ACIA data |R/W
-------+-----+-----------------------------------------------------+----------
$FFF00000 |CT60 Registers (SEE CHG for details) |W
: | |
$FFFBFFFF | |
-------+-----+-----------------------------------------------------+----------
Cookie Jar
Atari CT60 Cookies
Cookie Description
-------+----------------------------------------------------------------------
_CPU | CPU Type Bit 7 6 5 4 3 2 1 0
| Processor type is represented in decimal in the lowest byte.
| (0 = 68000, 40 = 68040, 60 = 68060)
-------+----------------------------------------------------------------------
_VDO | Video Type BIT 17 16
| Shifter Type | |
| 00 - ST ---------------------------------------------------------+--+
| 01 - STe --------------------------------------------------------+--+
| 10 - TT ---------------------------------------------------------+--+
| 11 - Falcon030 --------------------------------------------------+--'
-------+----------------------------------------------------------------------
_FDC | Floppy Drive Controller BIT 25 24 . 23-0
| Floppy Format | | |
| 00 - DD (Normal floppy interface) ------------------------+--+ |
| 01 - HD (1.44 MB with 3.5") ------------------------------+--+ |
| 10 - ED (2.88 MB with 3.5") ------------------------------+--' |
| Controller ID |
| 0 - No information available |
| 'ATC' - Fully compatible interface built in a way that -------------+
| behaves like part of the system. |
| 'DP1' - "DreamPark Development", all ID's beginning with -----------'
| "DP" are reserved for Dreampark.
-------+----------------------------------------------------------------------
_SND | Sound Hardware BIT 5 4 3 2 1 0
| CodeC (??) -----------------------------------------------' | | | | |
| Connection Matrix ------------------------------------------' | | | |
| DSP56001 -----------------------------------------------------' | | |
| 16 Bit DMA Sound -----------------------------------------------' | |
| 8 Bit DMA Sound --------------------------------------------------' |
| YM2149 -------------------------------------------------------------'
-------+----------------------------------------------------------------------
_MCH | Machine Type BIT 17 16
| 00 - ST/Mega ST -------------------------------------------------+--+
| 01 - STe & Compatible Machines (See Below) ----------------------+--+
| 10 - TT ---------------------------------------------------------+--+
| 11 - Falcon030 --------------------------------------------------+--'
| STe & Compatible Machines BIT 5 4 3 2 1 0
| 00000 - STe ----------------------------------------------+-+-+-+-+-+
| 00001 - ST Book ------------------------------------------+-+-+-+-+-+
| 10000 - Mega STe -----------------------------------------+-+-+-+-+-'
-------+----------------------------------------------------------------------
_SWI | Configuration Switches
| State of configuration switches
-------+----------------------------------------------------------------------
_FRB | Fast Ram Buffer
| 64k buffer for SDMA transfers to FAST-RAM (32-bit address space)
| 0 - no buffers assigned Not 0 - address of FastRam buffer
-------+----------------------------------------------------------------------
XFRB | Xentended Fast Ram Buffer
| Buffer for DMA transfers to FAST-RAM (32-bit address space)
| Address of a pointer to an XFRB structure :
| WORD version : BCD format (0101 for example)
| BYTE *xflock : semaphore
| BYTE *buffer : pointer to the buffer
| LONG size : size (64KB for example)
| XFRB *next : pointeur to the next structure (0 for example)
-------+----------------------------------------------------------------------
_FPU | FPU Type
| Software FPU BIT 20 19 18 17 16
| 68060's internal FPU ----------------------------' | | | |
| 68040's internal FPU -------------------------------' | | |
| 01 - 6888x present ------------------------------------+--+ |
| 10 - 68881 for sure -----------------------------------+--+ |
| 11 - 68882 for sure -----------------------------------+--' |
| SFP004 present ----------------------------------------------'
|
| Hardware FPU BIT 27 26 25 24
| 68040's internal FPU -------------------------------' | | |
| 01 - 6888x present ------------------------------------+--+ |
| 10 - 68881 for sure -----------------------------------+--+ |
| 11 - 68882 for sure -----------------------------------+--' |
| SFP004 present ----------------------------------------------'
|
-------+----------------------------------------------------------------------
_AKP | Keyboard/Language Configuration
| Keyboard Configuration Bit 15-8
| 1 - German 5 - Italian -------------------------------------------+
| 2 - French 7 - Swiss French --------------------------------------+
| 4 - Spanish 8 - Swiss German --------------------------------------+
| All others - English -----------------------------------------------'
| Language Configuration BIT 7-0
| 1 - German 5 - Italian -------------------------------------------+
| 2 - French 7 - Swiss French --------------------------------------+
| 4 - Spanish 8 - Swiss German --------------------------------------+
| All others - English -----------------------------------------------'
-------+----------------------------------------------------------------------
_IDT | International Date/Time Format
| Time Format BIT 12
| 0 - AM/PM, 1 - 24 hours --------------------------------------------+
| Date Format BIT 9 8
| 00 - MMDDYY ------------------------------------------------------+-+
| 01 - DDMMYY ------------------------------------------------------+-+
| 10 - YYMMDD ------------------------------------------------------+-+
| 11 - YYDDMM ------------------------------------------------------+-'
| Separator for date BIT 7-0
| ASCII Value (i.e. "." or "/") --------------------------------------'
-------+----------------------------------------------------------------------
MiNT | MiNT
| Present if MiNT/MultiTOS is active. Value represents the version
| number of the MiNT kernel in hex (0x104 = 1.04)
-------+----------------------------------------------------------------------
CT60 | CT60. Value is 0.
-------+----------------------------------------------------------------------